RC Transmitter & Receiver

6 channels, 30 models memory storage, a key switch to change mixes control, dual-rate, and cruise control, with a timer setting for training and racing, DSC port is optional for the simulator, TBS crossfire. Built-in gyro can keep the vehicle in a straight line, and Gyro sensitivity can be adjusted by the transmitter's VR switch, which fits for drifting car and on-road cars. Voltage telemetry, EPA, ABS, fail-safe, dual-rate, timer, cruise control, FPV head tracking, low power alarming, etc. CH3-CH5 can be customized to VR and tact switch. Real-time information telemetry on RC4GS V3 radio screen, like the vehicle's battery voltage, RSSI, etc. To support the telemetry function, the model must be equipped with a telemetry receiver R7FG/R8FG. Dual Programmable Mix Control any two channels can be mixed control and each channel can be customized, it also supports one switch to ON/OFF mix control. It is friendly for 4WD cars, tanks, dual ESC vehicles, and more. Dual-rate Switch by A Button RC4GS V3 supports one switch to change different servo travel, like channel 2 throttle travel can be switched to 50% or 100% by SWD or SWA button. Adapts to Most of Types Vehicles with 30 models storage and each model can be set up alarming and named separately, ID SEED function support assign one of vehicle running when they are power on. RC4GS V3 can be works with: R7FG/R6FG/R6F/R4FGM/R8FG/R8FGH.  RC4GS V3 Transmitter Specifications:Channels: 6Model: RC cars and boats.Control Distance: Up to 400 meters.Spread Spectrum: FHSS.Antenna Length: 106mm.Model: RC Cars/Boats.Operating Current: 80mAh-120mAh.Frequency: 2.4GHz ISM band (2400MHz-2483.5MHz).Operating Voltage: 4.8-15.0V DC(2s-4s lipo battery or 6*1.5AA)Batteries NOT INCLUDED.Battery compartments: 25*97*60mm (JST 2Pin connector).Screen: 128*64 resolution, LCD back light.Low Voltage Alert: Yes(Below 4.6V).Size: 22.4*17.5*11.6cm.Weight: 320g.

Read more less

Choice for beginner or funs who search for a rc controller with screen. The set include the F-08AT receiver built-in gyro. 2.4G frequency hopping technology with independent property rights, strong anti-interference performance and stable performance.The main control chip adopts 32-bit ARM core microcontroller.The 2.4G module is equipped with a PA amplifier.The ground distance can reach 300m and the air distance can reach 800m. 2.4inch TFT colour screen rc car remote control,We can also set the functions we need on the colour screen：Mix programming、Curve Setting、 intelligent vehicle control、cruise control、self-control protection. And the receiver F-08AT with gyro function.  Simple and comprehensive U interface, the real-time parameters and channel definitions of each channel are clear at a glance, allowing you to always grasp the dynamic information of the remote control  Standard return function, remote control supports 3 power supply modes. (Batteries are not included)   Specification  Applicable models: Model cars/ships/tanks, etc. Number of channels: 8 Remote control distance: About 300M* above ground Transmit power : ≈160MA-300MA  Receiver: Built-in Gyro Modulation mode: GFSK  Spread spectrum method : FHSS Responding speed: PWM:≤20MS  Frequency Range: 2.4GHZ ISM  Recelver sensitvity: -96 dbm  Recelver power supply: DC 3.5V-9V  Transmitter power supply: DC 3.7V-9V Note: The remote control distance is for reference only, actual use will vary according to different environments.   Package Include: 1*HotRC CT-8AT Remote 1*Receiver F-08AT 1*Voltage Return Cable  1*USB Cable  1*Manual

Read more less

Specifications: Transmitter: CT-10B  TFT Screen: 2.4inch Applicable: RC Car/Boat/Tank etc Transmitter Channel: 10CH Frequency: 2.4Ghz ISM Modulation mode: GFSK Spread Spectrum Mode: FHSS Reaction Speed: PWM:≤20ms Remote Control Distance: 300M-Ground Receive sSensitivity: -96dbm  Power:≈160MA-300MA Transmitter Voltage: DC 3.7V-9V Receiver: F-10A Frequency: 2.4Ghz ISM Receiver Channels: 10CH Receiver Voltage: DC 3.5V-9V CT-8B remote control is powered by a 18650 battery(Included) can directly charge by USB port. Package Include: 1*CT-10B Transmitter 1*F-10A Receiver 1*Rechagrable Battery 1*Retund Voltage Cbale 1*USB Data Cable 1*English Manual   

Read more less